Modified Gigli Bone Saw Wire "-" Turnable - Kirurgiske Instrumenter
- Klinisk Nytte: Specialized orthopedic osteosynthesis implant designed for trauma & reconstructive orthopedics.
- Arbejdsprofil: Anatomically pre-contoured low-profile geometry engineered to eliminate soft tissue impingement.
- Metallurgi og Finish: Medical-grade German Stainless Steel; electropolished satin finish to eliminate operating microscope glare.
- Genanvendelighed: Fully validated for repeated high-temperature steam autoclaving (134°C / 273°F).
- Kvalitetsstandarder: Compliant with ASTM F899, ISO 13485, and CE MDR medical device manufacturing standards.
OEM & International Cross-Reference Equivalents
| Manufacturer / Benchmark | Catalog Number (REF) | Specification Match |
|---|---|---|
| Aesculap | FH414 | Exact Pattern Match |
| Medline | PF31031 | Exact Pattern Match |
| RZ-Medizintechnik | 290-101-300 | Exact Pattern Match |
Notice of Nominative Fair Use: All manufacturer names, trademarks, symbols, and catalog part numbers are referenced solely for comparative identification, cross-reference, and equipment compatibility guidance. SurgiValley is an independent surgical manufacturer and is not affiliated with, sponsored by, or endorsed by any of the respective trademark owners.
SKU: 023020007
Categories: Bor | Tråde | Stifter
Surgical Engineering & Procedural Architecture
The Modified Gigli Bone Saw Wire "-" Turnable is manufactured to the highest clinical specifications, delivering superior tactile sensitivity, mechanical durability, and ergonomic balance for specialized surgical interventions. Precision-machined from certified medical-grade german stainless steel, each instrument undergoes rigorous heat treatment and multi-stage manual finishing at the workshop bench.
Key Performance Specifications
| Specification | Clinical Parameter |
|---|---|
| Instrument Category | Orthopedic Osteosynthesis Implant |
| Primary Specialty | Trauma & Reconstructive Orthopedics |
| Material Metallurgy | German Stainless Steel (Corrosion-Resistant) |
| Sterilization Protocol | Steam Autoclave (134°C / 273°F) / ETO / Cold Soak |
| Manufacturing Standard | DIN EN ISO 13485 / ASTM F899 / CE MDR Class I |
Surgical Instructions for Use & Autoclave Reprocessing
Prior to initial operative use and following every surgical procedure, this instrument must be reprocessed in strict compliance with ANSI/AAMI ST79 guidelines:
- Point-of-Use Pre-Treatment: Rinse immediately following surgery to prevent blood and surgical debris from drying on working edges and hinges.
- Ultrasonic Cleaning: Fully immerse in an enzymatic detergent solution (neutral pH 7.0–8.5) and cycle in an ultrasonic bath for 10–15 minutes.
- Lubrication: Apply medical-grade, water-soluble instrument lubricant (surgical milk) to all articulating joints and hinge assemblies.
- Steam Sterilization: Dynamic-air-removal (pre-vacuum) autoclave cycle at 134°C (273°F) for a minimum 4-minute exposure, followed by a 30-minute drying phase.
| Material | Hospital grade AISI 410 / 420 stainless steel, ISO 13485 & CE certified |
| Coating/Material | AISI 420 German Stainless Steel |
| Tip Type | Standard |
No product reviews yet
Write Your Review
Be the first to review this product
Share relevant product experience to help other buyers make an informed decision.