Napkin Holder "-" 10 pcs 2.5 cm (1.0) 2.5 cm (1.0") - Kirurgiske Instrumenter

Surgical Engineering & Procedural Architecture

The Napkin Holder "-" 10 pcs 2.5 cm (1.0) 2.5 cm (1.0") is manufactured to the highest clinical specifications, delivering superior tactile sensitivity, mechanical durability, and ergonomic balance for specialized surgical interventions. Precision-machined from certified medical-grade german stainless steel, each instrument undergoes rigorous heat treatment and multi-stage manual finishing at the workshop bench.

Key Performance Specifications

Surgical Instructions for Use & Autoclave Reprocessing

Prior to initial operative use and following every surgical procedure, this instrument must be reprocessed in strict compliance with ANSI/AAMI ST79 guidelines:

1. Point-of-Use Pre-Treatment: Rinse immediately following surgery to prevent blood and surgical debris from drying on working edges and hinges.
2. Ultrasonic Cleaning: Fully immerse in an enzymatic detergent solution (neutral pH 7.0–8.5) and cycle in an ultrasonic bath for 10–15 minutes.
3. Lubrication: Apply medical-grade, water-soluble instrument lubricant (surgical milk) to all articulating joints and hinge assemblies.
4. Steam Sterilization: Dynamic-air-removal (pre-vacuum) autoclave cycle at 134°C (273°F) for a minimum 4-minute exposure, followed by a 30-minute drying phase.