Skip to main content

Bone file 8 3/4" double-sided 20.0mm wide 1 coarse and 1 fine cross-serrated sides flat handle 2 10.2 cm (4.0") - Kirurgiske Instrumenter

  • Klinisk Nytte: Specialized bone rasp & file designed for orthopedic, spine & rhinoplasty.
  • Arbejdsprofil: Bidirectional cross-cut serrations for controlled osseous contouring and smoothing.
  • Metallurgi og Finish: Medical-grade German Stainless Steel; electropolished satin finish to eliminate operating microscope glare.
  • Genanvendelighed: Fully validated for repeated high-temperature steam autoclaving (134°C / 273°F).
  • Kvalitetsstandarder: Compliant with ASTM F899, ISO 13485, and CE MDR medical device manufacturing standards.

Brand: surgivalley

(Available)
OEM & International Cross-Reference Equivalents
UNIVERSAL NOMENCLATURE EU MDR 2017/745 & US FDA GUDID Classification
EMDN (EUDAMED): L091399
ORTHOPAEDIC SURGERY FORCEPS, REUSABLE - OTHER
GMDN Code: 35374
Stockinette
Manufacturer / Benchmark Catalog Number (REF) Specification Match
Medline PF95040 Exact Pattern Match
Symmetry Surgical A-32 Exact Pattern Match

Notice of Nominative Fair Use: All manufacturer names, trademarks, symbols, and catalog part numbers are referenced solely for comparative identification, cross-reference, and equipment compatibility guidance. SurgiValley is an independent surgical manufacturer and is not affiliated with, sponsored by, or endorsed by any of the respective trademark owners.

Quantity
View Quote (0)
Added to quote! View Quote Cart

SKU: 013020011

Categories: Raspe, Raspe

Tags: Bone Surgery, ENT Surgical Instruments

Surgical Engineering & Procedural Architecture

The Bone file 8 3/4" double-sided 20.0mm wide 1 coarse and 1 fine cross-serrated sides flat handle 2 10.2 cm (4.0") is manufactured to the highest clinical specifications, delivering superior tactile sensitivity, mechanical durability, and ergonomic balance for specialized surgical interventions. Precision-machined from certified medical-grade german stainless steel, each instrument undergoes rigorous heat treatment and multi-stage manual finishing at the workshop bench.

Key Performance Specifications

SpecificationClinical Parameter
Instrument CategoryBone Rasp & File
Primary SpecialtyOrthopedic, Spine & Rhinoplasty
Material MetallurgyGerman Stainless Steel (Corrosion-Resistant)
Sterilization ProtocolSteam Autoclave (134°C / 273°F) / ETO / Cold Soak
Manufacturing StandardDIN EN ISO 13485 / ASTM F899 / CE MDR Class I

Surgical Instructions for Use & Autoclave Reprocessing

Prior to initial operative use and following every surgical procedure, this instrument must be reprocessed in strict compliance with ANSI/AAMI ST79 guidelines:

  1. Point-of-Use Pre-Treatment: Rinse immediately following surgery to prevent blood and surgical debris from drying on working edges and hinges.
  2. Ultrasonic Cleaning: Fully immerse in an enzymatic detergent solution (neutral pH 7.0–8.5) and cycle in an ultrasonic bath for 10–15 minutes.
  3. Lubrication: Apply medical-grade, water-soluble instrument lubricant (surgical milk) to all articulating joints and hinge assemblies.
  4. Steam Sterilization: Dynamic-air-removal (pre-vacuum) autoclave cycle at 134°C (273°F) for a minimum 4-minute exposure, followed by a 30-minute drying phase.

Overall Length 10 cm (4")
Length (cm) 10 cm
Jaw Pattern Cross-Serrated
Handle Type Flat Serrated Handle
Material AISI 420 German Stainless Steel
No product reviews yet
Write Your Review
Please login to write a review!

Be the first to review this product

Share relevant product experience to help other buyers make an informed decision.

Help other buyers understand the product