Skip to main content

Spine Lateral Bayonet Anulus Cutting Knife - Kirurgiske Instrumenter

  • Klinisk Nytte: Specialized surgical knife designed for plastic, ent & ophthalmic surgery.
  • Arbejdsprofil: Micro-honed razor cutting edge ensuring ultra-clean incisions with minimal collateral tissue damage.
  • Metallurgi og Finish: Medical-grade German Stainless Steel; electropolished satin finish to eliminate operating microscope glare.
  • Genanvendelighed: Fully validated for repeated high-temperature steam autoclaving (134°C / 273°F).
  • Kvalitetsstandarder: Compliant with ASTM F899, ISO 13485, and CE MDR medical device manufacturing standards.

Brand: surgivalley

Volume Price Breaks (RTS) Factory Direct
1 - 9 pcs
$81.00
Sample Order
10 - 49 pcs
$68.85
-15%
50 - 99 pcs
$60.59
-25%
100+ pcs
$53.70
-34%
Estimated Order Total: $81.00 ($81.00/pc)
Direct Sialkot Surgical Forge & Clinical Manufacturing Assurance CE MDR & FDA Registered
Direct Sialkot Surgical Forge 35–45% procurement savings vs EU/US middlemen
AISI 420 / 440A German Stainless DIN 1.4021 metallurgy, 48–54 HRC, ASTM A967
134°C Autoclave Reusable Steam sterilizable with DIN silicone cassette durability
Low MOQ Hospital & Clinic Sets Custom procedure packs with laser UDI batch traceability
<24h Clinical Spec Review In-house precision tip geometry & sample benchmarking
Quantity
View Quote (0)
(250 products available)
Added to quote! View Quote Cart
OEM & International Cross-Reference Equivalents
UNIVERSAL NOMENCLATURE EU MDR 2017/745 & US FDA GUDID Classification
EMDN (EUDAMED): L0399
GENERAL SURGERY INSTRUMENTS, REUSABLE - OTHER
GMDN Code: 47549
General surgical instrument, reusable
Manufacturer / Benchmark Catalog Number (REF) Specification Match
Buxton Biomedical 68-8364 Exact Pattern Match
Medline PF184231 Exact Pattern Match
RZ-Medizintechnik 410-032-181 Exact Pattern Match

Notice of Nominative Fair Use: All manufacturer names, trademarks, symbols, and catalog part numbers are referenced solely for comparative identification, cross-reference, and equipment compatibility guidance. SurgiValley is an independent surgical manufacturer and is not affiliated with, sponsored by, or endorsed by any of the respective trademark owners.

SKU: 006120001

Categories: Knive og knivhåndtag

Tags: Neurosurgery, Mouth & Tongue

Surgical Engineering & Procedural Architecture

The Spine Lateral Bayonet Anulus Cutting Knife is manufactured to the highest clinical specifications, delivering superior tactile sensitivity, mechanical durability, and ergonomic balance for specialized surgical interventions. Precision-machined from certified medical-grade german stainless steel, each instrument undergoes rigorous heat treatment and multi-stage manual finishing at the workshop bench.

Key Performance Specifications

SpecificationClinical Parameter
Instrument CategorySurgical Knife
Primary SpecialtyPlastic, ENT & Ophthalmic Surgery
Material MetallurgyGerman Stainless Steel (Corrosion-Resistant)
Sterilization ProtocolSteam Autoclave (134°C / 273°F) / ETO / Cold Soak
Manufacturing StandardDIN EN ISO 13485 / ASTM F899 / CE MDR Class I

Surgical Instructions for Use & Autoclave Reprocessing

Prior to initial operative use and following every surgical procedure, this instrument must be reprocessed in strict compliance with ANSI/AAMI ST79 guidelines:

  1. Point-of-Use Pre-Treatment: Rinse immediately following surgery to prevent blood and surgical debris from drying on working edges and hinges.
  2. Ultrasonic Cleaning: Fully immerse in an enzymatic detergent solution (neutral pH 7.0–8.5) and cycle in an ultrasonic bath for 10–15 minutes.
  3. Lubrication: Apply medical-grade, water-soluble instrument lubricant (surgical milk) to all articulating joints and hinge assemblies.
  4. Steam Sterilization: Dynamic-air-removal (pre-vacuum) autoclave cycle at 134°C (273°F) for a minimum 4-minute exposure, followed by a 30-minute drying phase.

Shape Bayonet
Angle & Direction Bayonet
Handle Type Bayonet Serrated Thumb Grip
Coating/Material AISI 420 German Stainless Steel
Tip Type Bayonet
No product reviews yet
Write Your Review
Please login to write a review!

Be the first to review this product

Share relevant product experience to help other buyers make an informed decision.

Help other buyers understand the product