Plate bending iron 6 3/4 for 4.0mm and 5.0mm plates 15.0 cm (6.0)

Plate Bending Iron, 6 3/4, for 4.0 mm and 5.0 mm Plates

This plate bending iron is designed for controlled shaping of 4.0 mm and 5.0 mm plates during orthopedic procedures. With a 15.0 cm (6.0 in) length and a 6 3/4 size designation, it provides a dedicated instrument option for surgical teams working with compatible plate systems. The instrument may support plate contouring before or during fixation, helping clinicians achieve the desired fit for the treatment plan. Confirm compatibility with the selected plate design, surgical technique, and facility requirements before use. Follow the applicable instructions for use, cleaning, inspection, sterilization, and handling.

• Contour compatible 4.0 mm plates during orthopedic procedures.
• Contour compatible 5.0 mm plates during orthopedic procedures.
• Support plate preparation before fixation in the operating room.
• Provide a dedicated plate-bending option for hospitals, ASCs, and orthopedic clinics.

Specifications

• Clean, inspect, and sterilize according to the applicable instructions for use and facility protocol.
• Verify the instrument is free from damage, residue, or deformation before each use.
• Store in a clean, dry environment using handling practices appropriate for surgical instruments.

Specifications

Confirm plate compatibility and follow the applicable instructions for use before clinical application.