Skip to main content

Drill & Tap Sleeve Combined 3.5/2.5Mm

  • Combined drill and tap sleeve, sized 3.5 mm and 2.5 mm.
  • Measures 7.5 cm, or three inches, in overall length.
  • The sleeve combines drilling and tapping functions in one component.
  • Dual-size sleeve designation lists 3.5 mm and 2.5 mm measurements.
  • Length is listed as 7.5 centimeters, also shown as three inches.
  • Product name identifies a combined drill and tap sleeve.
(Available)
OEM & International Cross-Reference Equivalents
UNIVERSAL NOMENCLATURE EU MDR 2017/745 & US FDA GUDID Classification
EMDN (EUDAMED): L0399
GENERAL SURGERY INSTRUMENTS, REUSABLE - OTHER
GMDN Code: 47549
General surgical instrument, reusable
Manufacturer / Benchmark Catalog Number (REF) Specification Match
Aesculap 384.012 Exact Pattern Match
Innomed 7250-01 Exact Pattern Match
Katena K1-5173 Exact Pattern Match
Teleflex KM48466 Exact Pattern Match

Notice of Nominative Fair Use: All manufacturer names, trademarks, symbols, and catalog part numbers are referenced solely for comparative identification, cross-reference, and equipment compatibility guidance. SurgiValley is an independent surgical manufacturer and is not affiliated with, sponsored by, or endorsed by any of the respective trademark owners.

Quantity
View Quote (0)
Added to quote! View Quote Cart

SKU: 999020252

Categories: Drills | Wires | Pins

Tags: Orthopedic Drill Sleeves

Drill & Tap Sleeve Combined 3.5/2.5 mm, 7.5 cm (3 in)

The Drill & Tap Sleeve Combined 3.5/2.5 mm, 7.5 cm (3 in) provides a combined sleeve format for drill and tap instrumentation. Its 3.5 mm and 2.5 mm dimensions support use with compatible surgical instruments, while the 7.5 cm (3 in) length offers a defined working profile for procedural setup. This sleeve is intended for professional use in hospitals, ambulatory surgery centers, and clinics where organized, compatible instrumentation is essential. Review the device dimensions and facility protocols before use to confirm suitability for the planned procedure and instrument system.

  • Use with compatible drill instrumentation during surgical procedures.
  • Use with compatible tap instrumentation during surgical procedures.
  • Include in organized instrument trays for hospitals, ASCs, and clinics.
  • Select when a combined 3.5 mm and 2.5 mm sleeve format is required.
TypeCombined drill and tap sleeve
Dimensions3.5 mm / 2.5 mm
Length7.5 cm (3 in)
Quality AssurancePerformance Test: Validated
  • Clean, process, and sterilize according to applicable facility protocols and approved instrument-processing instructions.
  • Inspect the sleeve before use for visible damage, deformation, or contamination.
  • Confirm compatibility with the intended drill and tap instruments before use.

For professional use; verify compatibility and follow applicable surgical and sterilization protocols before clinical use.


Functional Size 2.5mm
Overall Length 7.5 cm (3")
Coating/Material AISI 420 German Stainless Steel
Tip Type Standard
No product reviews yet
Write Your Review
Please login to write a review!

Be the first to review this product

Share relevant product experience to help other buyers make an informed decision.

Help other buyers understand the product