Karlin microdiscectomy cervical curette 9 1/2" extra large working length 104.0mm," backward ang 5.1 cm (2.0") - Kirurgiske Instrumenter

Surgical Engineering & Procedural Architecture

The Karlin microdiscectomy cervical curette 9 1/2" extra large working length 104.0mm," backward ang 5.1 cm (2.0") is manufactured to the highest clinical specifications, delivering superior tactile sensitivity, mechanical durability, and ergonomic balance for specialized surgical interventions. Precision-machined from certified medical-grade german stainless steel, each instrument undergoes rigorous heat treatment and multi-stage manual finishing at the workshop bench.

Key Performance Specifications

Surgical Instructions for Use & Autoclave Reprocessing

Prior to initial operative use and following every surgical procedure, this instrument must be reprocessed in strict compliance with ANSI/AAMI ST79 guidelines:

1. Point-of-Use Pre-Treatment: Rinse immediately following surgery to prevent blood and surgical debris from drying on working edges and hinges.
2. Ultrasonic Cleaning: Fully immerse in an enzymatic detergent solution (neutral pH 7.0–8.5) and cycle in an ultrasonic bath for 10–15 minutes.
3. Lubrication: Apply medical-grade, water-soluble instrument lubricant (surgical milk) to all articulating joints and hinge assemblies.
4. Steam Sterilization: Dynamic-air-removal (pre-vacuum) autoclave cycle at 134°C (273°F) for a minimum 4-minute exposure, followed by a 30-minute drying phase.