6 Pin Clamp for Internal Fixation 1.8mm Cannula

Controlled Handling for 1.8mm Cannula Work

The 6" Pin Clamp for Internal Fixation 1.8mm Cannula is a dedicated handling instrument intended to hold and manage a 1.8mm cannula during internal-fixation work. Its 6-inch overall length provides practical reach for controlled positioning, while the 1.8mm jaw size corresponds to the named cannula dimension. By combining a defined working size with a longer instrument format, the clamp supports organized manipulation at the field and encourages deliberate cannula handling during setup and use. It is suited to workflows requiring controlled instrument management around a compatible 1.8mm cannula.

Use Cases

• Hold and position a compatible 1.8mm cannula during internal-fixation work.
• Support controlled manipulation when the cannula must be managed at a practical distance from the working area.
• Use during setup and procedural handling where a dedicated pin clamp is required for the named cannula size.

Specifications

Care & Reprocessing

• Clean and reprocess according to the applicable facility protocol and manufacturer instructions.
• Inspect the clamp and jaws before use for visible damage, distortion, or impaired movement.
• Handle the jaws carefully to preserve their working alignment and protect the instrument during transport.
• Store in a clean, dry location where the clamp will not be subjected to impact or compression.

Specifications

General use; follow facility protocols.